inlet and outlet

Close valves at both inlet and outlet ends.

进、出水端阀门关上.

It'should be included the inlet and outlet dimension for the max overall dim.

计算最大外形尺寸时,需加上进出线口尺寸.

Its better to put letters at the inlet and outlet.

最好在入口和出口处标上字母.

The chilled water inlet and outlet of chiller is usually 5 ℃ in traditional design.

在楼宇空调水系统设计中,冷水机组的冷水供、回水温差通常为5℃.

The temperature regulating valves designed for 300 MW units by the institute are mostly placed at the outlet piping of the cooler and a fewer placed at the inlet piping of the cooler.

西北电力设计院所设计的300MW机组，将温度调节阀多数设置在设备冷却器的出口管路上，少数设置在设备冷却器的进口管路上。

The crisscross inlet and outlet make various types of lamp routing possible.

※设有纵横两个方向的进出线口,适合多种布灯方案.

Shape, size, site, color, and inlet and outlet slope of page next o page.

页连接符号的形状 、 大小 、 位置 、 颜色 、 进出箭头.

There are much difference from traditional form of radial piston pumps in design, which are: There are two inlet and two outlet ways to achieve to being double acting piston radial pump;

此泵与传统形式的径向柱塞泵相比有很多不同的地方：配流轴采用两个吸、排油窗口，以实现双作用径向柱塞泵的构想；

These valves have NPT female inlet and outlet connection and brass body construction.

这些阀门配置NPT内螺纹进口和出口连接,黄铜阀体结构.

Its reactor has nozzles on side wall and material inlet and outlet.

反应器的两侧壁上装有喷嘴,上、下分别设有进料口和出料口.

Check the label and the inlet and outlet gauges.

检查商标和入口和出口的量表.

Several inlet and outlet methods and specifications.

进出线口有多种方式及规格.

It's better to put letters at the inlet and outlet.

最好在进口和出口处标上字母.

Connecting stage. Inlets and outlets can be moved. Inlet and outlet quantities can be specified.

连接阶段. 可移动输入口和输出口.可指定输入口和输出口数量.

The 3-D transient internal fluid of the exhaust manifold has been simulated with the inlet and outlet boundary conditions calculated by the thermodynamics.

通过热力学计算得到排气歧管的入口和出口边界条件，计算排气歧管的三维瞬态内流场；

Study on Inlet ( Outlet) Layout of Lock Filling and Emptying Culvert

船闸输水廊道进（出）口布置型式的研究

Pumps are vertical, single-level, single-use type , level inlet and outlet type.

1泵为立式 、 单级 、 单吸式 、 水平进水及水平出水.

Provide steam rings for tube side inlet and outlet flanges.

管程的入口与出口法兰配备蒸汽环.

Impeller or both water inlet and outlet pipelines blocked up.

叶轮或进出水管路阻塞.

Multi-material inlet and outlet can be set to meet the requirement of transportation.

可设置多个进出料口,满足物料输送的要求.